Key takeaways
- NAR policy does not set a term, so length is negotiated within state and brokerage limits[1].
- Some states do set limits: California caps buyer-broker agreements at 90 calendar days with no automatic renewal, and Washington sets a 60-day default for buyers[2][3].
- Size the term to the buyer’s realistic search plus time to get under contract, and plan the renewal conversation before it expires.
- Carryover clauses need special care: explain them, keep them short and check your state’s rules.
There is no national standard
Agents often ask what the “standard” term for a buyer agreement is. Nationally, there is none. NAR’s settlement FAQ says its policy does not dictate the term, and gives one day, one month, one house or one ZIP code as examples of what parties might agree[1]. Brokerage forms usually suggest a default, and some states impose limits, but the starting point is a negotiation.
That flexibility is useful. A term that fits the buyer’s plans builds trust; a term that feels like a trap invites objections and, later, complaints. The goal is a period long enough for you to do the work and short enough that the buyer never feels stuck.
States that set a limit or a default
California is the clearest example. Civil Code section 1670.50 limits buyer-broker representation agreements to three months, and the Department of Real Estate defines that as 90 calendar days, starting the day after the last party signs unless the agreement sets a delayed start date[2]. The agreement cannot renew automatically. A renewal must be in writing, dated and signed before the original expires, and it is also limited to three months[2]. The cap does not apply to agreements with corporations, LLCs or partnerships[2].
Washington takes a different approach. Its statute requires buyer services agreements to state the term, with a default of 60 days and the option of a longer term[3]. Other states have their own rules, and many leave the term entirely to the parties. Check your state’s law and your brokerage’s policy before offering anything longer than your form’s default. The California rules and the Washington requirements are covered in detail separately.
Where a state sets a cap, the cap is the maximum, not the target. A 90-day limit does not make 90 days the right answer for every buyer.
How long buying actually takes
A reasonable term covers two stretches: the search, and the time from finding the right home to getting it under contract. Homes are not sitting long. The median existing home was on the market for 33 days in September 2026, the same as a year earlier and up from 31 days in August[4]. A buyer who is ready and pre-approved can often find and contract on a home within a few weeks; one who is still saving or undecided on area can take months.
Source: National Association of REALTORS®, 2026[4]
Show the data
| Item | Value |
|---|---|
| Sep 2025 | 33 days |
| Aug 2026 | 31 days |
| Sep 2026 | 33 days |
Time on market is only a guide. It tells you how quickly good listings move, not how long your buyer will take to decide. Use it to set expectations at the first meeting: if the right home appears, the buyer may have days, not weeks, to act.
Matching the term to the buyer
| Buyer situation | Starting term to consider | Why |
|---|---|---|
| Pre-approved, clear criteria, ready now | 30 to 60 days | Enough time to search and contract; easy to renew if needed |
| Early stage, still deciding area or budget | A short term or a single property | Low commitment while they learn how you work |
| Relocation buyer visiting for a weekend | A short term for the visit, then a full term | Matches the decision point after the trip |
| Buyer waiting on a home sale or lease end | Term starting later, if your form allows a delayed start | Avoids burning months before they can buy |
| Repeat client or investor with ongoing purchases | Longer, where state law allows | Reduces paperwork for an established relationship |
These are starting points for a conversation, not rules. California agents, for example, cannot go beyond 90 days for an individual buyer however established the relationship[2].
Renewals and extensions
Most buyer relationships that last longer than the first term continue through a renewal. Treat the renewal as a check-in rather than paperwork: it is your chance to review what has happened, adjust the search and confirm the buyer still wants you.
Set a reminder before expiry
Put a reminder in your calendar or CRM two weeks before the end date, so you never discover an expired agreement on the morning of a showing.
Review the search
Summarize homes seen, offers made and what you have learned. Suggest changes to area, budget or criteria if the search has stalled.
Ask, don’t assume
Ask whether the buyer wants to continue. A buyer who feels free to say no is more likely to say yes.
Sign before the old term ends
In California the renewal must be signed before the original expires, and the same habit is sensible everywhere[2].
Restate the key terms
Repeat the fee, scope and new end date in the renewal, even if nothing else changed, and send a copy the same day.
When the term ends during a pending purchase
A common gap: the buyer goes under contract in week seven of an eight-week agreement, and closing is a month away. Read your form to see whether it automatically covers a purchase contract signed during the term through to closing. Many forms do, but do not assume it.
If the form is unclear, sign a short renewal or amendment that covers the pending purchase before the original term ends. In California that renewal must itself be signed before expiry and cannot exceed three months[2]. A two-minute signature avoids an argument about whether you were still the buyer’s agent on the day of closing, and it gives the settlement agent a clean document trail.
Early termination
A buyer who wants out before the term ends should be able to see, on the page, how to do it. Many brokerage forms let either side end the agreement with written notice; some require a reason or a notice period. Whatever your form says, explain it at signing.
If a buyer asks to end the agreement, ask why and listen. If the relationship is not working, release them gracefully. Holding an unhappy buyer to an agreement rarely produces a sale and often produces a complaint. Make sure the termination is in writing and that both sides know whether any carryover clause still applies.
Carryover and protection clauses
Many agreements include a clause saying the fee is still owed if, within a set period after the agreement ends, the buyer buys a property the agent introduced during the term. These clauses protect agents from buyers who wait out the term and buy with someone else, but they are also the clause buyers like least.
- Keep the period short and proportionate to the main term.
- Limit it to properties you actually introduced, and keep a dated record of them.
- Explain it out loud at signing; do not let the buyer discover it later.
- Check your state rules and form; some states restrict these clauses or require specific wording.
- Remember that the clause usually does not apply if the buyer signs a new agreement with another brokerage, depending on the form.
Example: setting a term with a buyer who is not ready
Example. A fictional couple, Ana and Luis, need to sell their condo before buying a house and expect to list in two months. The agent suggests a buyer agreement with a delayed start date matching the expected listing date, followed by a 60-day term. In the meantime, the agent sends market updates without touring anything.
When the condo listing goes live, the agreement starts. Six weeks later they are under contract on a house, well within the term. Had the agent started the clock at the first meeting, the agreement would have expired just as the couple became ready to buy, forcing a renewal at the busiest moment.
Signs your term is wrong
- Buyers regularly object to the length before signing: your default is probably too long.
- You are renewing most agreements at least once: your default may be too short for your market.
- Agreements expire without anyone noticing: you need a reminder system, not a different term.
- Buyers ask for a single-property agreement every time: consider offering one as standard.
Review these signs every quarter. The exclusive vs non-exclusive comparison can also help if term length is really a proxy for a different concern about commitment.
Frequently asked questions
What is the maximum length of a buyer agreement in California?
Three months, defined by the Department of Real Estate as 90 calendar days, with no automatic renewal. The cap does not apply to agreements with corporations, LLCs or partnerships[2].
Is there a national rule on buyer agreement length?
No. NAR policy does not dictate the term[1]. State law and brokerage policy set any limits.
What happens in Washington if the agreement does not state a term?
Washington’s statute requires the term to be addressed, with a default term of 60 days for buyers and the option of a longer term[3].
Can a buyer agreement renew automatically?
In California it cannot[2]. Elsewhere it depends on state law and the form, but a signed renewal is the safer practice.
References
National Association of REALTORS® (2024). NAR Settlement FAQs (opens in a new tab) ↑
California Department of Real Estate (2025). Implementation of AB 2992 (2024) Regarding Buyer-Broker Representation Agreements: Adopted Regulation Text (opens in a new tab) ↑
Washington State Legislature (2024). RCW 18.86.020: Agency relationship (opens in a new tab) ↑
National Association of REALTORS® (2026). Existing-Home Sales Increased 1.5% in September, According to NAR Report (opens in a new tab) ↑