Showings and Scheduling

Lockbox Access and Showing Security Best Practices

Practical lockbox and key control for listing agents: code rules, key logs, showing access records, seller prep and what to do after an incident.

AssistCall research teamPublished Reviewed by Faruque Amin, VP of Sales and Marketing6 min read

On this page
  1. The lockbox is the front door
  2. Choose the right access method
  3. Rules for access codes
  4. Key control in five steps
  5. Use the access log
  6. Prepare the seller
  7. Inspectors, appraisers and contractors
  8. Vacant homes and after-hours requests
  9. When something goes wrong
  10. Example: a weekly check catches a problem
  11. Frequently asked questions
  12. References
Showings and Scheduling: Lockbox Access and Showing Security Best PracticesArticle coverSHOWINGS AND SCHEDULINGLockbox Access andShowing Security BestPracticesAva for Real Estate TeamsInsightsShowings and Scheduling: Lockbox Access and Showing Security Best PracticesArticle coverSHOWINGS AND SCHEDULINGLockbox Access andShowing Security BestPracticesAva for Real Estate Teams

Key takeaways

  • Treat access codes like keys: unique per listing, released only to confirmed agents for a set window, and changed when a listing ends.
  • Keep a key log and reconcile lockbox access records against confirmed showings every week.
  • Prepare sellers to secure valuables, medicines, mail and documents; identity theft starts with paperwork left on a desk[1].
  • Real estate fraud losses reported to the FBI rose sharply in 2025, so verify anyone asking for access by a channel you trust[2].

The lockbox is the front door

When a seller signs a listing agreement, they hand over something more personal than a price: access to their home while they are not there. A lockbox makes that access convenient for every agent who shows the home. It also makes the home only as secure as the weakest code, the most careless visitor and the oldest key copy.

The risks are not only theft. Criminals target real estate because large sums move quickly. The FBI’s Internet Crime Complaint Center recorded more real estate fraud complaints in 2025 than in 2024[2], and reported losses rose from about $173.6 million to about $275.1 million[2]. Access to a property, a seller’s documents or a lockbox code can be one piece of a larger scheme.

Reported real estate fraud losses in the USLosses reported to the FBI Internet Crime Complaint Center
Reported real estate fraud losses in the USComparison. 2024: $173,600,000; 2025: $275,110,419.$173.6M20242024: $173,600,000$275.1M20252025: $275,110,419Reported real estate fraud losses in the USComparison. 2024: $173,600,000; 2025: $275,110,419.$173.6M20242024: $173,600,000$275.1M20252025: $275,110,419

Source: FBI Internet Crime Complaint Center (IC3), 2025[2]

Show the data
ItemValue
2024$173,600,000
2025$275,110,419

Choose the right access method

Access methods compared. Many listings combine an electronic lockbox with accompanied showings for first visits.
MethodBest forWeak points
Mechanical combination lockboxLow-traffic listings where electronic boxes are not availableOne code shared widely; no record of who opened it
Electronic lockbox tied to a showing systemMost occupied and vacant listingsDepends on agents keeping app credentials private
Smart lock with temporary codesVacant homes, new construction, rentals between tenantsNeeds power and connectivity; codes must expire
Key held at the office, collected and returnedHigh-value homes, owners who refuse lockboxesSlower; needs office hours and a sign-out process
Accompanied showings onlyHomes with special risks or owners presentListing agent or assistant must attend every showing

Electronic systems are usually the strongest option because each opening is tied to a named agent and a time. If a seller asks why you recommend one, that record is the answer.

Rules for access codes

  • Use a unique code for every listing. Never reuse codes across listings or across years.
  • Release codes only to the confirmed showing agent, through the showing system, for the confirmed window.
  • Never put a code in public remarks, photos, signs or a text to a buyer.
  • Change codes after any concern, after a contractor or inspector finishes and when the listing ends or goes under contract.
  • Do not send a code to a caller who asks for it by phone; check their confirmed showing first.
  • For smart locks, set codes to expire at the end of each window.

Many people are wary of impersonation for good reason; nine in ten Americans say people often or sometimes pretend to be someone else to steal personal information[1]. Apply the same caution to agents you do not know. A confirmed showing in your system is verification; a confident voice on the phone is not.

Key control in five steps

  1. Count the keys at listing

    Ask the seller how many keys exist and who has them: family, cleaners, neighbors, contractors.

  2. Label without addresses

    Tag keys with a listing code, never the street address, and keep the index separately.

  3. Log every key movement

    Who took which key, when, why and when it came back. A shared spreadsheet is enough.

  4. Limit copies

    One key in the lockbox, one at the office for emergencies. Do not cut more without the seller’s permission.

  5. Recommend re-keying at the end

    Advise sellers who are staying, and buyers who are moving in, to change the locks after closing or when a listing is withdrawn.

Use the access log

An electronic lockbox or smart lock produces a record of every opening. It is only useful if someone reads it. Once a week, compare the access log against the showings that were confirmed.

  1. Every opening should match a confirmed showing, inspection, appraisal or service visit.
  2. Openings outside a confirmed window need an explanation from the agent who made them.
  3. Repeated openings by the same agent without showings deserve a polite question.
  4. Share a summary with the seller in your weekly update; it reassures them that someone is watching.

Most agents already rely on showing scheduling tools[3]. Ask whether yours can match openings to confirmed showings automatically. If it cannot, a ten-minute weekly check does the same job.

Prepare the seller

Security also depends on what is left in the home. Give every seller a short list before the first showing.

  • Lock away jewelry, cash, small electronics, keys and car fobs.
  • Remove prescription medicines from bathrooms and kitchens.
  • Put away mail, bills, bank statements, tax documents and anything with account numbers or signatures.
  • Log out of computers and put away tablets; turn off voice assistants that can make purchases.
  • Secure firearms in a locked safe or remove them from the home.
  • Take down family photos and children’s names from walls if the seller prefers.
  • Tell you about cameras, and whether they record audio, so visiting agents can be told.

Cameras deserve a word of caution. Federal law permits recording with one party’s consent, but some states require all parties to agree[4]. Advise sellers to check the rules before recording sound and to disclose cameras in the showing instructions.

Inspectors, appraisers and contractors

Showings are not the only visits. Once a home is under contract, inspectors, appraisers, pest and sewer specialists and repair contractors all need access, often on short notice and sometimes without an agent present. These visits are where many offices relax their rules, and where a code shared once can stay in circulation for months.

  • Schedule every non-showing visit through the same system as showings, so it appears in the access log.
  • Prefer accompanied visits for anyone who is not a licensed agent. If that is not possible, issue a temporary code that expires the same day.
  • Ask the buyer’s agent to attend the inspection and be responsible for locking up.
  • Tell the seller in advance who is coming, why and for how long.
  • Change codes once repairs are finished and again before the final walk-through.

The same logic applies to stagers, photographers and cleaners before the listing goes live. Give each one their own access window, and remove it when the job is done. A home that has had twelve people with the same code before the first showing has no meaningful access control at all.

Vacant homes and after-hours requests

Vacant listings attract more risk because nobody notices problems. Check the home after busy weekends, keep lights on timers, and make sure the lockbox is on a door that cannot be seen from the street when possible. Treat late-evening requests on vacant homes with extra care: verify the agent, confirm the buyer is real and consider attending.

If a caller claims to be the owner of a vacant property and asks for the lockbox code or wants to list quickly by email only, stop. Verify ownership through public records and the title company, using contact details you find yourself.

When something goes wrong

  1. If anyone is in danger or there are signs of a break-in, call 911 first.
  2. Change the lockbox code and smart lock codes immediately and remove the key if needed.
  3. Call the seller, tell them what happened and what you have done.
  4. Pull the access log and showing records for the period and preserve them.
  5. Tell your broker and, if a visiting agent is involved, their broker.
  6. Report fraud attempts to the FBI’s Internet Crime Complaint Center and your local police.

Example: a weekly check catches a problem

Example: a fictional listing agent reviews the access log for a vacant listing on Monday. Six openings match six confirmed showings. A seventh opening at 8:40 p.m. on Saturday matches no showing; it was made by an agent who showed the home that afternoon. The listing agent calls her, and she explains that her buyer left a phone inside and she went back to collect it. The explanation checks out with the buyer’s agent’s broker. The listing agent changes the code anyway, notes the incident in the file and adds a line to the showing instructions: “Any return visit must be confirmed with the listing agent first.”

For the rest of the showing process, see how to reduce showing no-shows and late cancellations, the first-showing checklist for buyer’s agents and smart lockboxes and showing access technology.

Frequently asked questions

How often should lockbox codes be changed?

At the start of every listing, after any concern, after contractors finish and when the listing goes under contract or ends. Smart lock codes should expire after each window.

Should I give a lockbox code to a buyer?

No. Release codes only to the confirmed showing agent for the confirmed window, never to buyers or unconfirmed callers.

What should sellers lock away before showings?

Valuables, medicines, keys, mail and financial documents, plus firearms. Ask them to log out of computers and disclose any cameras.

What should I do if a lockbox log shows an unexplained entry?

Change the codes, ask the agent who made the entry, inform the seller and your broker, and keep the records.

References

  1. Pew Research Center (2020). Most Americans don't answer cellphone calls from unknown numbers (opens in a new tab) ↑

  2. FBI Internet Crime Complaint Center (IC3) (2025). Federal Bureau of Investigation Internet Crime Report 2025 (opens in a new tab) ↑

  3. National Association of REALTORS® (2026). REALTORS® Adopt Technology to Save Time and Improve the Client Experience, NAR Report Finds (2026 REALTORS® Technology Report) (opens in a new tab) ↑

  4. Legal Information Institute, Cornell Law School (U.S. Code text) (2026). 18 U.S. Code § 2511 - Interception and disclosure of wire, oral, or electronic communications prohibited (opens in a new tab) ↑

Book a demo

See Ava handle your calls.

Book a short demo. We’ll walk through your calls and workflow, and agree what Ava should take care of.

Book a demo