Showings and Scheduling

Showing Vacant Homes: Access, Utilities and Security

Keep vacant listings secure, lit and ready to show: access control, utility settings, a weekly check routine, agent safety and remote seller verification.

AssistCall research teamPublished Reviewed by Faruque Amin, VP of Sales and Marketing6 min read

On this page
  1. Why vacant listings need their own plan
  2. Access control
  3. Utilities: keep them on and set
  4. A weekly vacant-home check
  5. Make the house look lived in
  6. Showing an empty home well
  7. Contractors, cleaners and other visitors
  8. Time on market costs more when a home is empty
  9. Agent safety in empty houses
  10. Remote owners and identity checks
  11. Frequently asked questions
  12. References
Showings and Scheduling: Showing Vacant Homes: Access, Utilities and SecurityArticle coverSHOWINGS AND SCHEDULINGShowing Vacant Homes:Access, Utilities andSecurityAva for Real Estate TeamsInsightsShowings and Scheduling: Showing Vacant Homes: Access, Utilities and SecurityArticle coverSHOWINGS AND SCHEDULINGShowing Vacant Homes:Access, Utilities andSecurityAva for Real Estate Teams

Key takeaways

  • A vacant home has no one to notice a leak, an open door or a dead bulb. Someone has to check it on a schedule.
  • Keep every utility on and set: heat or cooling in a safe range, water on unless winterized, lights on timers.
  • Control access tightly: logged lockbox or smart lock, codes released per showing and a check after each visit.
  • Agents meet strangers alone in empty houses. Meet new buyers first at the office and use a check-in routine.

Why vacant listings need their own plan

Vacant homes are easy to show and hard to look after. There is no seller to tidy up, no one to answer the door to a contractor and no one to notice that a pipe is dripping or that the back door was left unlocked after Tuesday's showing. Problems that would be fixed in an hour in an occupied home can sit for a week.

Vacant listings come from estates, relocations, investors and sellers who have already bought. Owners have often been in the home a long time; the median seller had owned for 12 years before selling[1]. Estate and long-tenure sales can mean older systems, deferred maintenance and an owner who lives far away. Plan for all three.

Access control

  • Use a lockbox or smart lock that logs every entry, and connect it to your showing system. 68% of REALTORS already use showing scheduling tools[2].
  • Release codes only for confirmed showings, and use time-limited codes where the lock supports them.
  • Keep a count of physical keys. Collect spare keys from the seller, family members and contractors, and record who still has one.
  • Lock interior doors to the garage, basement or outbuildings only if the showing instructions say how to open them; locked rooms frustrate buyers.
  • Never put access details in public remarks or listing photos.
  • Change codes and collect lockboxes the day the listing closes or is withdrawn.

Utilities: keep them on and set

Example utility settings for a vacant listing; adjust for climate and the home's systems
Utility or systemSetting while listedWhy
ElectricityOn; key lights on timersShowings, inspections and the appraisal need power; lit homes look occupied
HeatingOn, at a safe minimum in cold monthsPrevents frozen pipes; buyers notice a cold house
CoolingOn, at a moderate setting in hot monthsControls humidity and odors
WaterOn, unless the home has been professionally winterizedInspectors need to run fixtures; check for leaks weekly
GasOn, pilot lights litWater heater, furnace and stove must be testable
Internet or hubOn if cameras or smart locks rely on itKeeps access logs and cameras working

Put the utility plan in writing with the seller, including who pays the bills until closing. Ask the seller to call their insurer about vacancy terms in their policy; coverage for empty homes can differ from an occupied home, and the seller should know before the listing goes live.

A weekly vacant-home check

  1. Walk the outside

    Doors, windows, gates, the garage door and any signs of entry. Check for flyers and packages on the porch.

  2. Walk the inside

    Every room, including basement, attic access and closets. Look and listen for water, check ceilings for stains.

  3. Check systems

    Thermostat setting, water heater, sump pump if present, and that lights and timers work.

  4. Reset for showings

    Lights to the showing setting, blinds as instructed, a quick sweep of entries, fresh air if the house smells closed up.

  5. Review the access log

    Compare entries with confirmed showings. Any entry you cannot explain gets a call to the showing agent the same day.

  6. Send the owner a short report

    Date, condition, any issues and photos. Remote owners value this more than any marketing update.

Check after any storm, freeze or heat wave too, and ask a neighbor to call you if they see anything unusual.

Make the house look lived in

  • Lights on timers in two or three rooms, varying through the evening.
  • Mail forwarded, and the porch and mailbox cleared weekly.
  • Lawn mowed, leaves raked and snow cleared on schedule.
  • Trash bins put away, not left at the curb.
  • A disclosed video doorbell or exterior camera at the main entry, if the seller agrees.
  • Neighbors on either side told who the listing agent is and how to reach you.

Showing an empty home well

Empty rooms can look smaller and colder than furnished ones, and buyers struggle to judge scale. Light staging of key rooms, or virtual staging clearly labeled as such in the photos, helps. So do floor plans with dimensions; 75% of sellers say they are more likely to hire an agent offering virtual tours and interactive floor plans[3].

Leave a printed feature sheet and the disclosure summary on the kitchen counter, along with a list of system ages and recent repairs. With no seller to ask, buyers rely on what you leave for them. Keep the thermostat comfortable for the showing hours if you can schedule it, and air the house before weekend clusters.

Contractors, cleaners and other visitors

Showings are not the only entries. Vacant listings get cleaners, landscapers, repair contractors, stagers, photographers and appraisers. Each needs access, and each is a gap in security if access is informal.

  • Give non-showing visitors their own time-limited code or a scheduled lockbox entry, never the agent code.
  • Log every visit in the same calendar as showings so the access log always has an explanation.
  • Ask contractors to text you when they arrive and leave, and to send a photo of the locked front door.
  • Check the home yourself after any major work: water off at fixtures, doors locked, debris removed.
  • Keep a short list of approved vendors the seller has authorized, with their phone numbers.

Time on market costs more when a home is empty

Every extra week of a vacant listing means another week of utilities, insurance, taxes and upkeep for an owner who no longer lives there. The median existing home spent 33 days on market in September 2026[4], and price reductions tend to peak in the fall[5]. Remote owners who see a weekly carrying cost are often more open to pricing advice than owners still living in the home. Put a simple estimate of monthly carrying costs in front of them at listing, and review it at each price conversation.

Agent safety in empty houses

Vacant homes put agents alone with people they may not know, in a building where no one will hear them. In NAR's member safety survey, 34% of residential REALTORS had met a new or prospective client alone at a secluded location or property in the past year, and 64% used a smartphone safety app to track their whereabouts and alert colleagues[6].

Residential REALTORS who use a smartphone safety appApps that track whereabouts and alert colleagues, NAR 2022 member safety survey
Residential REALTORS who use a smartphone safety appDonut chart. Use a safety app: 64%.Use a safety app: 64%64%
  • Use a safety app 64%

Source: National Association of REALTORS®, 2022[6]

Show the data
ItemValue
Use a safety app64%
  1. Meet every new buyer at the office or a public place before showing a vacant home.
  2. Tell a colleague the address, time and buyer's name, and agree a check-in time.
  3. Park on the street, enter first and unlock an exit door before the buyer arrives.
  4. Let the buyer lead into basements, attics and garages; stay near an exit.
  5. Leave if anything feels wrong. You can reschedule a showing; you cannot undo an incident.

Remote owners and identity checks

Many vacant homes belong to owners who live elsewhere: heirs, investors, relocated sellers. That makes communication and identity both harder. Verify the identity of any owner you have not met in person before you sign a listing agreement, using your brokerage's procedures and the title company's help, and confirm that the person signing actually owns the property.

Agree how you will communicate: a weekly written report, a set call time and a named local contact for emergencies. Tell the owner in writing how closing funds will be sent and that instructions will never change by email; reported US real estate fraud losses reached $275.1 million in 2025[7].

Example: An agent lists a vacant house for two siblings who live in different states. At listing, she verifies both owners through the title company, collects three spare keys, sets heat to a safe minimum and lights on timers, and agrees a Monday report. In week three, the access log shows an entry with no confirmed showing. She calls the agent who had the previous day's slot, learns he returned for a forgotten phone, and adds a rule that every re-entry needs a new request.

Related guides: coordinating showings for out-of-state buyers, single-property touring agreements, rescheduling showings without annoying sellers, sending tour recaps to buyers and the final walk-through checklist.

Frequently asked questions

Should utilities stay on in a vacant house for sale?

Yes, in most cases. Inspections and appraisals need power, water and gas, and heat or cooling protects the home. Only shut water off if the home has been professionally winterized.

How often should a vacant listing be checked?

At least weekly, and after storms, freezes or heat waves. Check the outside, every room, the systems and the access log, and send the owner a short report.

How do you keep a vacant home secure while it's listed?

Use a logged lockbox or smart lock, release codes only for confirmed showings, collect spare keys, put lights on timers, keep the yard maintained and ask neighbors to call you.

Is it safe for agents to show vacant homes?

It can be, with precautions: meet new buyers first in a public place, share your schedule with a colleague, enter first, stay near an exit and leave if something feels wrong.

References

  1. National Association of REALTORS® (2026). Top 10 Takeaways from NAR's 2026 Profile of Home Buyers and Sellers (opens in a new tab) ↑

  2. National Association of REALTORS® (2026). REALTORS® Adopt Technology to Save Time and Improve the Client Experience, NAR Report Finds (2026 REALTORS® Technology Report) (opens in a new tab) ↑

  3. Zillow Research (2026). Sellers: Results from the Zillow Consumer Housing Trends Report 2026 (opens in a new tab) ↑

  4. National Association of REALTORS® (2026). Existing-Home Sales Increased 1.5% in September, According to NAR Report (opens in a new tab) ↑

  5. Realtor.com Economic Research (2026). The Best Time To List a Home: The Week of April 12-18 (2026 analysis) (opens in a new tab) ↑

  6. National Association of REALTORS® (2022). 2022 REALTORS and Member Safety Residential Report (opens in a new tab) ↑

  7. FBI Internet Crime Complaint Center (IC3) (2025). Federal Bureau of Investigation Internet Crime Report 2025 (opens in a new tab) ↑

Book a demo

See Ava handle your calls.

Book a short demo. We’ll walk through your calls and workflow, and agree what Ava should take care of.

Book a demo